Red Barn Farm

brings you Weaving Accessories from:


New Product, TO BE CONVENIENTLY PLACED NEAR THE LOOM Here is a way to keep tools neatly arrange while you weave. This Holds-All can hold a multiple of accessories and fibers. It is also designed to allow you to fasten a hand bobbin winder onto it, or use it as a doubling stand. And, it includes a spool rack that holds up to 10 spools or bobbins Made out of Maple with the Leclerc finish. Dimensions: Width: 34½" Height: 31" Depth: 11½" Weight: 20 lbs #6370-1000 contact us for pricing



Boat Shuttles Made of Canadian Maple, well balanced and smooth, closed bottom, bobbin support with spring, 5 sizes to choose from, beautifully shaped to fit your hand. Contact us for pricing

Slim Boat shuttle with one 4" styrene bobbin, 1" x 1" 3/4" x 11" 4 oz.

Boat Shuttle with one 4" styrene bobbin, 1 1/8" x 1 3/4" x 11" 5 oz.

Boat Shuttle with one 4" styrene bobbin, 1 3/8" x 1 3/4" x 11" 6 oz.

Boat Shuttle with one 6" styrene bobbin 1 3/8" x 2" x 15 1/4" 9oz.

Boat Shuttle holding two bobbins to weave 2 threads at the same time, 13 5/8" long, uses 4" bobbins

 


Ski Shuttles are made for medium to heavy yarn or rag, this special shuttle has the yarn wrapped horizontally around it so it slides easily in the warp. Contact us for pricing

1 3/8" x 1 1/2" x 17 3/4" 5 oz

1 3/8" x 2" x 27 1/2" 9oz.


Rag Shuttle, the picture is of the wonderful rag shuttle that has a removable rod to hold a bobbin, there is a hole in the side for thread. Contact us for pricing.

1 1/2" x 2 1/2" x 15" 5 1/2oz

1 1/2" x 2 1/2" x 22" 8oz

Regular Rag Shuttles made of hard maple, smooth varnish finish

1 1/2" x 2 1/2" x 15"

 


Tension Box

This tension box is used with the Sectional Warp Beam and is adjustable to fit any Leclerc floor loom. the tension is adjustable and it gives uniform tension on all warp ends as they are wound from the spool rack to the loom. Two open 12 epi combs allow easy threading and help guide threads into the proper section. It can be used with counter when filling bobbins, holding threads and giving numer of yards on bobbins.

Tension Box Extension This extension with one comb close to your warp gives you better control on the width of the yarn secton so the guides are not needed. Height of comb is adjustable.

Counter The counter is placed on the tension box and measures the yardage of the warp to ensure that all sections are of the same length. Easily removable from the tension box.



This is the amazing Rocking Bench that is a wonderful aid to weavers. The rocking action is very comfortable for long hours at the loom, is adjustable in height in 1" increments from 21" to 26 3/4". In addition the seat can be set at a fixed ange of 84 degrees at any height, provifing an aligned surface to the back of the leg when the treadles are being depressed. This alignment elimates the seat edge cutting into the back of the leg shutting off blood circulation. With a full 12" x 24" seat area this bench will provide maximum comfort over extended weaving periods.

Bench Bags, these pouches attach to each end of the seat, providing storage for all of a weavers needs, shuttles, etc.


This is the hand crank bobbin winder, turning ratio 1/7.5 Tapered plated shaft for all Leclerc bobbins and Leclerc Spools, clamps to a table top, set on special permanent greased bearings.
contact us for pricing


Electric bobbin winder holds single end of bobbin, foot powered control

Electric Bobbin Winder Holds both ends of the bobbins. Designed for bobbins of any lenght between 1" to 8" so that you can wind your bobbins for your boat shuttles or your spools for your warping rack. Foot operated speed control.
contact us for pricing.




Warping tools, click on the blue highlighted titles to see the tools.
Warping Boards are very sturdily made and are easily knocked down for storage. They can be used flat on a table or hung on a wall. 6345-1000 will accomodate a warp up to 13yds long
6345-5000 will do a warp up to 21yd long. 

Warping Reels are the fastest way of winding a warp. The cross sections that hold the pegs may be adjusted up or down, depending on the warp length. When the reel is not in use you may remove the cross sections and pegs so the reel folds to occupy less space.
Table top warping reel, gives 2 yd per rotation and can warp up to 22 yds long. Height 38", Width 26" contact us for pricing
Floor Model gives 4 ys per rotation and can warp up to 50 yd, Height 68", Width 59"
contact us for pricing


 

Red Barn Farm Home

Email Us for More Info on Ordering

 

Contact us to help in your ordering, we take Visa, Mastercard, Checks and Paypal, Money orders or you can pay online using Paypal. It is easy and safe to use Paypal, first contact us for shipping fees, etc.

 

 

Red Barn Farm, Rose Herbst, 11843 Flambeau Road, Butternut, WI 54514, 715-769-3773